Construction: Vacuum formed shell made out of durable impact and slip-resistant weatherable polymer (Centrex™). Reinforced with a polyester fiberglass resin backing and structurally supported with a pressure-treated, foundation grade 2 x 4 pedestal base (spa must be supported by the structural base not the spa lip) 2 lb density foam insulation on shell and plumbing. Step rise and run designed to meet health code guidelines, including contrasting stripes at leading edge of spa steps and seat bench for added safety.
Spa Fittings: Pre-plumbed including all piping manifolds, terminating at spa perimeter.
Skimmer: Waterways 540-8620 standard throat Renegade skimmer. Top access skimmer optimum flow rate 40-60 GPM. NSF certified 2” skimmer and equalizer connections.
Circulation Floor Dual Equalized Drains: (C-895, C-812, C-814) Waterways #640-1350V. 37.7 square inch open area, rated at 11O US gpm. NSF certified to VGB / ASME / ANSI / SOFA standards. 2.5" termination manifold piping port.
Circulation Floor Dual Equalized Drains: (C-875) Waterways #640-2750V. 11.8 square inch open area, rated at 55 usgm @ 1.5 fps, NSF certified to VGB / ASME / ANSI / SOFA standards. 2" termination manifold piping port.
Dual Hot Water Circulation Directional Returns: Balboa/Hydro-Air #10-3500. 2" (C-875), 2" (C-895, C-812) termination piping manifold port.
Triple Hot Water Circulation Directional Return(C-814 only): Balboa/Hydro-Air #10-3500. 2" termination piping manifold port.
Hydrotherapy Jets: Balboa/ Hydro-Air #10-5100 WHT. 13 US gpm@ 12 psi, 3/8" nozzle; 2" terminated venturi air manifold port, 2.5" termination manifold piping port.
Dual Sidewall Jet Suctions Equalized: Paramount SDX2 #044-172-2231-01. 43.2 square inch open area, rated at 140 US gpm each. IAMPO certified to VGB / ASME / ANSI / SOFA standards. 3" termination manifold piping port.
Optional Stainless Steel Spa Light & Wet Niche: SP1022S Hayward wall fitting installed for optional 12 volt light and 12 volt transformer.
** Note: Each spa installation require regional health approval. Contact local authorities in your area for health guidelines. All spa shell components are NSF listed VGBA compliance or certificate of conformity. Technical support can be provided to your engineer or design consultant for recommended Equipment selection. Contact the office for additional information.
Specifications are subject to change without notice; this brochure is for illustrative purposes only.
©Coast Spas Manufacturing Inc. All Rights Reserved. All other brands, product names, company names, trademarks, trade names and service marks used are the property of their respective owners. Due to our continuous improvement programs, Coast Spas may make product modifications and enhancements. Product pictured may include options beyond standard equipment. Please check with local dealership or Coast Spas Manufacturing for the most current product specifications.
